RUSSIAN M-100 (GOST 10585-99)

Mining Minerals

Specifications

Ash content, not more %	0.14
Mass fraction of sulphur, not more % - low – sulphur – residual – oil	0.5
Temperature of the flash, not less ºC in the closed crucible	-
In the open crucible ºC	110 min
The temperature of solidification, not higher ºC	25
Kinematics viscosity	118 max
Water content	0.5%
Mechanical impurities	Lower than 0.1%
Acidity	Lower than 5 mg KOH/ 100ml
Alkalinity	nil
Gross Calorific Value Kcal/kg / KJ/kg	Min9700/41300
Density at 15.0 deg. C Kg/l	0.925 max
Hydrogen Sulfide Content (H2S) pom	0.5 max
Carbon Residual	Lower than 7%
Vanadium (V) ppm	23
Aluminum (Al) ppm	5
Silicon (Si) ppm	12
Nickel (Ni) ppm	29
Asphaltenes m/m	3.6%
Distillation @4 mm Hg	-
Extracted to 760 mm Hg	-
Initial Boiling Point deg. C	216
5% recovered deg. C	259
10% recovered deg. C	310
20% recovered deg. C	358
30% recovered deg. C	445
40% recovered deg. C	502
50% recovered deg. C	534
60% recovered deg. C	538
75% recovered deg. C	545
80% recovered deg. C	-
90% recovered deg. C	-
Final Boiling point deg. C	550
Percent Recovered volume	78%
Residual volume	22%
Total Nitrogen m/m	0.192%
Sodium (Na) ppm	15